Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: neonomega on 29 March 2010, 17:27:10

Title: engine light issue
Post by: neonomega on 29 March 2010, 17:27:10

hi i have a 3.0 mv6 1 more problem  to sort out lol regards to engine light if i disconnect the knock sensors both of them the engine light dont come on but if i disconnect any other sensor the light comes on. im trying to find out why my engine runs lumpy on idle ive covered everything eles breather icv leads plugs so im now looking at sensors has any 1 eles had the same problem i would luv to hear about it

thanks

Title: Re: engine light issue
Post by: TheBoy on 29 March 2010, 18:29:29

EML won't come on with faulty knock sensors until about 2000 rpm ;)


Lumpy at idle is most likely a sticky ICV or unmetered air.


Try to avoid the 'txt speak' in posts, makes it very hard to read, which is why its in the Forum Guidelines :y