Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: blakey on 05 April 2010, 10:12:47

Title: omega 3.2 manual conversion
Post by: blakey on 05 April 2010, 10:12:47

Hi guys , first ever post !
i bought a omega 2.6 cdx auto and put in a 3.2 with manual gearbox(56k) complete with 3.2 ecu chip transponder etc
everything ok but failed mot on emmisions and tc light is on i think they may be connected
any ideas ? i read somewhere that the abs/tc ecu is waiting for info from the auto gear selector ?   

Title: Re: omega 3.2 manual conversion
Post by: TheBoy on 05 April 2010, 10:35:38

Suspect it needs a Tech2 on it.

Anywhere near these locations: http://theboy.omegaowners.com

Title: Re: omega 3.2 manual conversion
Post by: serek on 05 April 2010, 23:04:37

what you done to gear selector???

TC light come on mine car too when done conversion but that was this code (http://img215.imageshack.us/img215/203/dsc00535ph.jpg) (http://img215.imageshack.us/i/dsc00535ph.jpg/)
are you got car with spanner on dash too??
if so you need see The Boy for re program you ECU to manual mode
and if you want your TC light get fix with out of plug Tech2 you need to join some wire on selector to position P or N , will drop some more info soon

Title: Re: omega 3.2 manual conversion
Post by: Matchless on 05 April 2010, 23:29:47

Did you follow the wiring instructions in my maintenance guide?

Title: Re: omega 3.2 manual conversion
Post by: serek on 05 April 2010, 23:37:40

Quote

Did you follow the wiring instructions in my maintenance guide?

yes I did but 2.6 and 3.2 got different engine loom :-[