Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: daddypeet on 05 April 2010, 11:13:03

Title: radiator fan omega elite 3ltr
Post by: daddypeet on 05 April 2010, 11:13:03

Hello every one love the site, I have recently replaced radiator to cure overheating problem now my fan is not cutting in at all how do I eliminate fan fault or sensor fault or is there a fuse, gone have looked at bank of fuses under bonnet all look intact  thanks  Pete

Title: Re: radiator fan omega elite 3ltr
Post by: TheBoy on 05 April 2010, 11:19:34

Short out the sensor in top of rad, fans should come on. If so, sensor.

Title: Re: radiator fan omega elite 3ltr
Post by: daddypeet on 05 April 2010, 11:38:14

Thanks  mate yes the fan works ok so it is sensor if anyone has one for sale  contact me please 

Title: Re: radiator fan omega elite 3ltr
Post by: ScaniaV8 on 09 April 2010, 11:18:56

I have same problem (but with 2.5V6) main Radiator engine fan operation.

When you say short out...do you mean just to unplug the connector that attaches to the top Radiator Thermo switch and then leave the fan connector still plugged in..start engine and the main big fan should be running?  thanks

Title: Re: radiator fan omega elite 3ltr
Post by: Sixstring on 09 April 2010, 11:22:07

Undo connector, join connections with a piece of wire, turn on ign, fans should spin.

Title: Re: radiator fan omega elite 3ltr
Post by: ScaniaV8 on 09 April 2010, 11:25:08

Sixstring...cheers for confirmation..thanks for prompt feedback...much appreciated.