Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: ScottieMV6 on 10 April 2010, 17:06:20

Title: Fault codes after HG change
Post by: ScottieMV6 on 10 April 2010, 17:06:20
Thanks to the use of AndyB's cheapo tech 2 I have managed to clear all of the fault codes on my car. Ran it again for 5 minutes and the only one to re-appear is 46 - SAI Pump Voltage Low. To me this is a result in itself :D :D

However I want to get rid of the EML so that I know if I get another code in the future. I have checked everything - pump is plugged in, new solenoid fitted and wiring properly connected. The pipework in front of the engine is disconnected (because the one way valve was knackered) but all the pipes are blocked off. I have removed the relay and replaced with another and have removed the 50 amp fuse under the bonnet. All to no avail. >:( >:(

Help I am stuck now! :-/ :-/
Title: Re: Fault codes after HG change
Post by: feeutfo on 11 April 2010, 06:24:58
bumped for replys from page 2
Title: Re: Fault codes after HG change
Post by: ScottieMV6 on 11 April 2010, 10:23:57
Thanks Chris.

Maybe no-one has an answer?? Maybe I have found a problem that no-one has a solution to ;D ;D ;D
Title: Re: Fault codes after HG change
Post by: RobG on 11 April 2010, 10:41:50
With main fuse removed you`ll only get a code 46 if the wiring/connections to the solenoid is faulty. Need to doublecheck
Title: Re: Fault codes after HG change
Post by: ScottieMV6 on 11 April 2010, 11:18:05
I am only assuming that it is the main fuse for the SAI pump as TB seems to think that the SAI pump was only fused under the bonnet post 1998 models and mine is a 1998.

I removed a 50 amp fuse located in the main relay box next to the battery. :-/