Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: UrbanFox on 13 April 2010, 20:06:01

Title: V6 Inlet manifold's..
Post by: UrbanFox on 13 April 2010, 20:06:01

Am I correct in assuming that these are the same for all of the V6's, from the 2.5 upto the 3.2?

Thanks muchly :)

Title: Re: V6 Inlet manifold's..
Post by: tunnie on 13 April 2010, 20:08:20

actual manifolds are the same i think, but i re-call someone saying the 3's have bigger injectors

Title: Re: V6 Inlet manifold's..
Post by: Lazydocker on 13 April 2010, 20:14:07

I think the 2.5/2.6 manifolds are the same and the 3.0/3.2 are the same :-/

Title: Re: V6 Inlet manifold's..
Post by: UrbanFox on 13 April 2010, 20:15:38

Poo lol.

Thanks guys! I was hoping they were the same - means that I will have to wait until I get a car before getting the inlet manifold and tapping it!

Title: Re: V6 Inlet manifold's..
Post by: Entwood on 13 April 2010, 20:18:11

If you are thinking of LPG conversion .. Kevin Wood was doing a "service" with an inlet manifold that he was drilling and tapping then exchanging for the old one for people doing conversions .. might be worth giving him a PM..... his work looks really, really good ..   :y :y :y

Title: Re: V6 Inlet manifold's..
Post by: UrbanFox on 13 April 2010, 20:19:25

Thanks Entwood, I will drop him a PM :)

Title: Re: V6 Inlet manifold's..
Post by: Lazydocker on 13 April 2010, 20:19:52

Quote

If you are thinking of LPG conversion .. Kevin Wood was doing a "service" with an inlet manifold that he was drilling and tapping then exchanging for the old one for people doing conversions .. might be worth giving him a PM..... his work looks really, really good ..   :y :y :y

His work is really, really good :y :y

I'm sure he's got a selection of manifolds now... He certainly took another one home on Sunday ::)

Title: Re: V6 Inlet manifold's..
Post by: UrbanFox on 13 April 2010, 20:23:36

LOL, PM sent!

I just wish I wasnt after a decent specc'd estate now, as Saloon's are so much cheaper :(

Title: Re: V6 Inlet manifold's..
Post by: tunnie on 13 April 2010, 20:26:50

Quote

Quote

If you are thinking of LPG conversion .. Kevin Wood was doing a "service" with an inlet manifold that he was drilling and tapping then exchanging for the old one for people doing conversions .. might be worth giving him a PM..... his work looks really, really good ..   :y :y :y

His work is really, really good :y :y

I'm sure he's got a selection of manifolds now... He certainly took another one home on Sunday ::)

I'll second that, brilliant work on my 2.2 manifold  :y

Title: Re: V6 Inlet manifold's..
Post by: Martin_1962 on 13 April 2010, 23:42:03

The 2.6 inlet manifold matches the 3.0 inlet divider if that is of any help

Title: Re: V6 Inlet manifold's..
Post by: Kevin Wood on 14 April 2010, 00:19:02

I have a couple of 3.0/3.2 manifolds. No 2.5/2.6 ones, though. I've never had the two side by side to compare them. I'm surprised that the intake divider isn't a different diameter as that's the obvious difference, that the 2.5/2.6 would have a narrower intake tract to keep the gas flowing faster. :-/

Anyway, I can drill and tap a manifold no problem.  :y

Kevin

Title: Re: V6 Inlet manifold's..
Post by: Darth Loo-knee on 14 April 2010, 12:41:41

Well i have fitted 3.0 inlet manifolds on 2.5's and not had any problems at all.