Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Zhing1 on 23 April 2010, 02:27:04

Title: Checking Proceedures for P0500
Post by: Zhing1 on 23 April 2010, 02:27:04

Hi. Does anyone have the checking procedures for Fault Code P0500 "no vehicle speed signal". Much appreciate your feedback.

Title: Re: Checking Proceedures for P0500
Post by: Welung666 on 23 April 2010, 06:07:21

Does your speedo work?

The speed sensor is on the rear left wheel, check the wiring and that it is secure as a start :y

Title: Re: Checking Proceedures for P0500
Post by: TheBoy on 23 April 2010, 10:13:15

In which ECU is that code stored?

Title: Re: Checking Proceedures for P0500
Post by: Zhing1 on 23 April 2010, 11:51:55

Quote

In which ECU is that code stored?

Hi, Probably the main ECU.

Title: Re: Checking Proceedures for P0500
Post by: TheBoy on 23 April 2010, 11:56:14

Quote

Quote

In which ECU is that code stored?

Hi, Probably the main ECU.

If engine ecu, and you have previously said that your speedo doesn't work, then that points to your abs ecu being knackered

Title: Re: Checking Proceedures for P0500
Post by: Zhing1 on 24 April 2010, 04:07:57

Quote

Quote

Quote

In which ECU is that code stored?

Hi, Probably the main ECU.

If engine ecu, and you have previously said that your speedo doesn't work, then that points to your abs ecu being knackered

Do you think i should get a new abs ecu?