Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Smooth on 25 April 2010, 11:21:49

Title: temp gauge sensor location
Post by: Smooth on 25 April 2010, 11:21:49

Where is the temp gauge sensor on the 01 2.6,had plenum an all off recently and since rebuild its not working,had quick look round but cudnt see owt,any pics would be great,cheers all :y

Title: Re: temp gauge sensor location
Post by: ScottieMV6 on 25 April 2010, 18:08:28

If its the same as the 3.0 V6 then its attached to the coolant bridge at the back of the V. Plenum and all inlet off and you will see it (or at least where it should be) :y

Title: Re: temp gauge sensor location
Post by: TheBoy on 25 April 2010, 18:30:23

Can get to with scuttle off, but easier to see with plenum off.  Then its just behind the intake manifolds, in middle of coolant bridge.  Its a single spade type connector that clips onto sensor.

Title: Re: temp gauge sensor location
Post by: Smooth on 25 April 2010, 19:00:08

Thanks gentlemen   :y

Title: Re: temp gauge sensor location
Post by: Andy B on 25 April 2010, 19:40:11

Like I said, in the middle of the V ... at the back  ;)  ;)  ;)