Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: bigtow on 28 April 2010, 21:03:38

Title: cloudy projector headlamp lenses
Post by: bigtow on 28 April 2010, 21:03:38

the lenses on my projector headlight are very cloudy dull what's the best way to bring them back to life ?

Title: Re: cloudy projector headlamp lenses
Post by: VXL V6 on 28 April 2010, 21:17:28

Some G3 compound seems to do a good job or a very fine wet and dry paper.

Title: Re: cloudy projector headlamp lenses
Post by: Zuffenhausen on 28 April 2010, 22:07:33

You could try Brasso, test in a corner first.

Title: Re: cloudy projector headlamp lenses
Post by: MutantCav on 28 April 2010, 22:09:43

Or give them a good t-cutting

Title: Re: cloudy projector headlamp lenses
Post by: duggs on 28 April 2010, 22:40:02

Easy peasey answer to this one.

Use cheap WHITE toothpaste, plenty of water and plenty of rubbin'. I kid you not !

Amazing as it sounds, it works fantastically, PLUS your car finishes up all minty fresh. Allow a good 30 mins per light and plonk on as much toothpaste as you wish.

I found Lidl's "elcheapo" dentalux brand to be VERY good. Have a go and report back....suspect you'll be as gobsmacked as I was. Who would have thought. ?

Title: Re: cloudy projector headlamp lenses
Post by: Skint on 30 April 2010, 10:06:19

Quote

You could try Brasso, test in a corner first.

I used Brasso on my regular lamps, they are no longer yellow although there is still a crazed pattern in places on them! I also used a rubber sanding block from Halfords to help apply pressure.