Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Will B on 06 May 2010, 13:53:38

Title: SAI pipe removal
Post by: Will B on 06 May 2010, 13:53:38

Hi all

Can anyone shed some light on the best way to remove the SAI pipe as I'm trying to fit a new tensioner and it wont fit with the pipe where it is. And ideally what tools will I require to get the job done :y

thanks

Title: Re: SAI pipe removal
Post by: Marks DTM Calib on 06 May 2010, 14:48:08

Just replace the plastic pulley wheel, no need to change the whole tensioner (and the pulley can be bought seperately)

Title: Re: SAI pipe removal
Post by: Will B on 06 May 2010, 18:24:06

Quote

Just replace the plastic pulley wheel, no need to change the whole tensioner (and the pulley can be bought seperately)

So so wish I knew that sooner lol  ::)

Well the old tensioner is out managed to wiggle it out of the bottom of the car without removing the pipe but now I need to somehow get the new one in . . .  :-/

Title: Re: SAI pipe removal
Post by: KW on 06 May 2010, 21:32:10

Quote

Well the old tensioner is out managed to wiggle it out of the bottom of the car without removing the pipe but now I need to somehow get the new one in . . .  :-/

Reverse the procedure you used to get the old one out?