Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Tonka. on 04 May 2010, 14:24:39
-
Found the car with the hazards flashing the other night. But no sound from the horns under the drivers side scuttle.
I do not have the powersounder fitted (new one coming from Welung666). :y
I have set the alarm with the bonnet switch held down and when releasing the switch, after a minute or so, the lights flash but it is totally silent.
Is this normal or where do I start looking :-/
-
Found the car with the hazards flashing the other night. But no sound from the horns under the drivers side scuttle.
I do not have the powersounder fitted (new one coming from Welung666). :y
I have set the alarm with the bonnet switch held down and when releasing the switch, after a minute or so, the lights flash but it is totally silent.
Is this normal or where do I start looking :-/
I'm glad you reminded me ;D ;D ;D
Is the horn plugged in next to where the powersounder lives? The alarm doesn't use the cars horn but the seperate one.
-
I'm glad you reminded me ;D ;D ;D
Sorry Lee, wasn't a dig :-X ;D ;D
-
The horn is plugged in and sounds with direct 12v but not when the alarm is activated :-/
Whilst I was at it I sorted the holes in the exhaust ;D ;D
-
The horn is plugged in and sounds with direct 12v but not when the alarm is activated :-/
Any ideas anyone ;)
-
Somebody must know something about this, please? :y
-
same thing happened on mine.. sounder went barmy every now and then so disconnected it. when i tested the round flat horn (the one next to sounder) it was dead.. but with a direct 12v conection it worked.. bought a new horn (about £9 from vaux 18 months ago)...plugged it in and it worked fine.. maybe after a while they get a bit tired. When the alarm goes off it only pulses 12v to the horn for around 1 second at a time. hope this helps :y