Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: DAVE T on 16 May 2010, 07:51:59

Title: Control indicator for engine electronics
Post by: DAVE T on 16 May 2010, 07:51:59

Can anybody tell me how to cure this problem without going to a vauxhall dealer,When indicator light is on there is a loss of power.
Many thanks DAVE T. 2.6 CDX AUTO OWNER

Title: Re: Control indicator for engine electronics
Post by: same #same# on 16 May 2010, 07:54:15

try the relay may just need changing. causing a sort. if all light are working would try that.

Title: Re: Control indicator for engine electronics
Post by: Andy H on 16 May 2010, 08:23:00

I would start by reading through the guides in the Omega help section.

Omega Common issues and FAQ (http://www.omegaowners.com/forum/YaBB.pl?num=1243594756)

Maintenance guide index (http://www.omegaowners.com/forum/YaBB.pl?num=1259003779)

Then I would use the Pedal Trick (http://www.omegaowners.com/forum/YaBB.pl?num=1189022687) check for fault codes.
 
V6 (DBW) - Y26SE and Y32SE Motronic ME3.11 Fault Codes (http://www.omegaowners.com/forum/YaBB.pl?num=1220619696)

Title: Re: Control indicator for engine electronics
Post by: DAVE T on 16 May 2010, 08:24:46

Thanks for that will try.