Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: rhinofender on 18 May 2010, 10:06:39

Title: fault code 19 incorrect rev sigal on 2.5 v6
Post by: rhinofender on 18 May 2010, 10:06:39
Hi, can anyone advise me on how to remedy this fault please?
Title: Re: fault code 19 incorrect rev sigal on 2.5 v6
Post by: henryd on 18 May 2010, 10:10:03
someone correct me if I am wrong but that code will always be present if codes are checked with engine switched off
Title: Re: fault code 19 incorrect rev sigal on 2.5 v6
Post by: coastie123 on 18 May 2010, 10:10:09
Crank sensor..

I have the same fault - see my topic "some code questions"
Title: Re: fault code 19 incorrect rev sigal on 2.5 v6
Post by: coastie123 on 18 May 2010, 10:11:16
Quote
someone correct me if I am wrong but that code will always be present if codes are checked with engine switched off

code 19 is crank sensor
code 31 is usually present with the engine off..
Title: Re: fault code 19 incorrect rev sigal on 2.5 v6
Post by: henryd on 18 May 2010, 10:12:24
Quote
Quote
someone correct me if I am wrong but that code will always be present if codes are checked with engine switched off

code 19 is crank sensor
code 31 is usually present with the engine off..

I stand corrected :y ;D
Title: Re: fault code 19 incorrect rev sigal on 2.5 v6
Post by: RobG on 18 May 2010, 10:18:24
Quote
Hi, can anyone advise me on how to remedy this fault please?
Here you go matey http://www.omegaowners.com/forum/YaBB.pl?num=1174321688
Suggest you replace with genuine VX before it packs up completely and leaves you stranded
Title: Re: fault code 19 incorrect rev sigal on 2.5 v6
Post by: rhinofender on 18 May 2010, 13:06:51
Thanks very much for your help
Title: Re: fault code 19 incorrect rev sigal on 2.5 v6
Post by: rhinofender on 18 May 2010, 17:23:37
Have managed to remove sensor and wiring, how does one test the sensor?
Title: Re: fault code 19 incorrect rev sigal on 2.5 v6
Post by: tunnie on 18 May 2010, 17:27:01
Quote
Have managed to remove sensor and wiring, how does one test the sensor?

If you were getting code 19, its breaked  ;)