Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Terbs on 18 May 2010, 20:00:57

Title: Tyre safety
Post by: Terbs on 18 May 2010, 20:00:57
Hi all,
I noticed the nearside rear tyre on my 2.5 Elite estate is down to the tread guides. God knows how it passed MOT last week, also as I have the dreaded low beam checklight on. Fiddled somewhere I suspect.
Anyhow, I punched in my reg on some tyre sites and they came up with different to what is on my car.
My tyres are 235x45x17x97Z (Avons) on Alloys

The sizes that came up were 205x65xR15Hx94 and 195xdittox91

Are these 235 tyres safe for my car and how come my rims are 2" bigger than the manufacturers listing ? I assume some modification?

Sorry if this is a 'typical newbie' query, but I have never had this happen before with any other car I have owned.

Have not got handbook to check against.
Title: Re: Tyre safety
Post by: Andy B on 18 May 2010, 20:09:36
Quote
Hi all,
I noticed the nearside rear tyre on my 2.5 Elite estate is down to the tread guides. God knows how it passed MOT last week, also as I have the dreaded low beam checklight on. Fiddled somewhere I suspect.
Anyhow, I punched in my reg on some tyre sites and they came up with different to what is on my car.
My tyres are 235x45x17x97Z (Avons) on Alloys

The sizes that came up were 205x65xR15Hx94 and 195xdittox91

Are these 235 tyres safe for my car and how come my rims are 2" bigger than the manufacturers listing ? I assume some modification?

Sorry if this is a 'typical newbie' query, but I have never had this happen before with any other car I have owned.

Have not got handbook to check against.

Don't believe everything you read on the net. If your rims are 17" I assume your car is a facelift, and that size is correct for your car. Most Omegas haven't used 15" for years (apart from in the boot)  :y
Title: Re: Tyre safety
Post by: Terbs on 18 May 2010, 20:12:14
Thanks Andy....reasurring.
I assume I have a Facelift as window switches are on the door and car was first registered July 2000
Title: Re: Tyre safety
Post by: Andy B on 18 May 2010, 20:13:08
Quote
....
I assume I have a Facelift as window switches are on the door and car was first registered July 2000

correct!  :y

Title: Re: Tyre safety
Post by: Simon72 on 18 May 2010, 20:16:07
I believe it was an option extra to have 17" wheels

Page 229 of the owners manual states 235/45/R17 Tyres ;-)

http://images.omegaowners.com/documents/UserGuides/OmegaOct2002.pdf

Title: Re: Tyre safety
Post by: Terbs on 18 May 2010, 20:17:17
Andy, whilst on the subject of Alloys, I read somewhere about tyre people damaging the rims...is specialists tyre equipment needed for alloys

And thanks, Simon
Title: Re: Tyre safety
Post by: Simon72 on 18 May 2010, 20:23:51
Quote
Andy, whilst on the subject of Alloys, I read somewhere about tyre people damaging the rims...is specialists tyre equipment needed for alloys

And thanks, Simon

No specialist equipment is needed for alloys, just use a repretable company to change the tyres on the tyre machine. My advice would be to take a photo with date stamp of the alloy before you take it to them and then if when you get the wheel back it has damage to the rim then you can claim for a replacement alloy or repair....

I had one alloy damaged once on a Toyota Supra I had and the H-Q Tyre Services had to get the alloy repaired FOC ;-)
Title: Re: Tyre safety
Post by: Terbs on 18 May 2010, 20:27:22
 :y
Brilliant responses, chaps....all noted and filed !!!
Title: Re: Tyre safety
Post by: TheBoy on 18 May 2010, 22:54:36
235/45 ZR17 are the correct tyres for your Elite.

Again, as you are near WIM, try them for tyres - they are normally very competitive.  They also have a touchless tyre remover, if you are concerned about your alloys...
Title: Re: Tyre safety
Post by: Andy B on 18 May 2010, 22:58:23
Quote
.... 
They also have a touchless tyre remover, ....

How does that work? By magic?  :-/ ;)
Title: Re: Tyre safety
Post by: Terbs on 18 May 2010, 23:32:16
http://www.blackboots.co.uk/bosstouchlesstyremachine.php

Andy...have a look at that...video of Boss touchless tyre machine.

Thanks Jamie