Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: soupdragon44 on 18 May 2010, 16:05:13

Title: Omega B door moulding removal.......help!
Post by: soupdragon44 on 18 May 2010, 16:05:13

Am doing a few tidy up jobs on my car and the n/s/r door moulding is damaged from being caught on a wall (not by me!!) can someone tell me how to remove it? is it stuck on or clipped etc and does anyone have a mint spare for a '97 CD? Thanks :)

Title: Re: Omega B door moulding removal.......help!
Post by: Mr Skrunts on 18 May 2010, 16:12:15

http://www.omegaowners.com/forum/YaBB.pl?num=1192324445

 :y :y

Title: Re: Omega B door moulding removal.......help!
Post by: JezInBrum on 18 May 2010, 18:04:38

Only bits of advice i will add are to make sure the panel is clean and secondly dont do it on a cold day. The adhesive strip will not stick to the cold metal very well. Would suggest using a hair dryer or paint gun to warm the panel, be extra careful if using paint gun as this will be extremely hot and wil burn the paint.

Title: Re: Omega B door moulding removal.......help!
Post by: soupdragon44 on 18 May 2010, 20:40:31

Thank you...... :)

Title: Re: Omega B door moulding removal.......help!
Post by: eddie on 18 May 2010, 23:57:18

If it is a rear door watch your positioning or it will catch the rear edge of the front door when opening.

eddie

Title: Re: Omega B door moulding removal.......help!
Post by: soupdragon44 on 19 May 2010, 00:55:02

gotta find a replacement one first and the only one in the local breakers is no good.....can't post wanted on here as still a newbie  :( cheers anyway