Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: rhinofender on 19 May 2010, 17:32:43

Title: fault code 19
Post by: rhinofender on 19 May 2010, 17:32:43

Hi, members very kindly advised previously on the code, what it means and how to replace the crank sensor. Unfortunately after fitting a new one whilst battery was disconnected, the car starts better but we still have a fault code 19, is this normal? Very grateful for any advice you can give.

Title: Re: fault code 19
Post by: henryd on 19 May 2010, 17:35:24

code will disapear after some run cycles or you may have to use a code reader to delete it

Title: Re: fault code 19
Post by: Andy B on 19 May 2010, 17:35:57

Quote

Hi, members very kindly advised previously on the code, what it means and how to replace the crank sensor. Unfortunately after fitting a new one whilst battery was disconnected, the car starts better but we still have a fault code 19, is this normal? Very grateful for any advice you can give.

The fault code will remain logged in the ECU till it's had 20 or so 'clean starts' or cleared via a code reader. Give it a few days & do another paper clip test & I'm sure it'll have gone.  :y  :y

Title: Re: fault code 19
Post by: rhinofender on 19 May 2010, 19:51:04

Thanks very much