Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Road Hog Mad on 18 May 2010, 11:54:30

Title: 2.5V6 LPG to 3.0V6
Post by: Road Hog Mad on 18 May 2010, 11:54:30
Just a quickie, someone is selling a 2.5 V6 LPG kit, do these go straight on to the 3.0 with them being both V6's? and.. does anyone on here fit the LPG kit and how much?  ;)
Title: Re: 2.5V6 LPG to 3.0V6
Post by: tango on 18 May 2010, 15:56:58
hi
yes the kit should be same however it might need recalliberating due to the bigger engine needing more fuel
Title: Re: 2.5V6 LPG to 3.0V6
Post by: Lazydocker on 18 May 2010, 17:13:30
It will fit but will need calibration.

You also need to bear in mind that you're still going to need to buy pipework etc...

TBH, if it were me the kit would have to be under £100 to even consider fitting a 2nd hand one
Title: Re: 2.5V6 LPG to 3.0V6
Post by: Kevin Wood on 19 May 2010, 10:10:06
Quote
It will fit but will need calibration.

You also need to bear in mind that you're still going to need to buy pipework etc...

TBH, if it were me the kit would have to be under £100 to even consider fitting a 2nd hand one

Agreed. Also, bear in mind that the LPG jets might need drilling larger for a 3.0 and that other parts of the kit (e.g. vapouriser) might not be able to deliver enough gas for a 3.0.

In any case, don't touch it unless you have the software, lead, dongle, etc. that you will need to map it because it will need some adjustment.

Kevin
Title: Re: 2.5V6 LPG to 3.0V6
Post by: Lazydocker on 19 May 2010, 14:58:52
Just to add another thought to this... I would be unlikely to re-use the kit I fitted to my 3.0 if I replaced the car TBH... By the time you've bought all the extra bits you're about half way to a new kit, with a 2 year warranty :y
Title: Re: 2.5V6 LPG to 3.0V6
Post by: Road Hog Mad on 20 May 2010, 14:17:21
cheers guys