Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: VX1 on 23 May 2010, 14:18:13
-
What is needed to put the rear spring back into place on a mig? Got the spring out with brut force but now needing help to get the replacement in. Any help would be appreciated.
-
This is an excellent guide VX;
http://www.omegaowners.com/forum/YaBB.pl?num=1170939305
-
Thanks zulu77, I looked for the how to in the search bar but it didn't come up with anything. This is now going to save a hell of alot of time now.
-
When you have dropped the diff you may need to get someone to stand on the rear arms to give enough clearance to get the springs home.
-
in addition to the guide i dropped/unhooked the exhaust on mine to allow the arms to drop fully, just lifted the springs out. Beware rusty exhausts though, might brek off prematurely.
-
Thanks for the help guy's, followed the guide to the letter but still wasn't enough room, so used a long bar to push the rear arm down and managed to get the spring in with the help of spring compressor's, job done and all back together. :y