Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: mantagte on 27 May 2010, 18:15:21
-
i am updating the look of my 1995 omega
i have some facelift door trims on therer way from RobG :y
i have removed the trims on the drivers side and all there is is two holes one each end
but on welung666's guide here http://www.omegaowners.com/forum/YaBB.pl?num=1252930979/0#0
there are loads of oblong slots in the door
so the question is how do i get them to stay on the door
-
The keyhole (oblong) slots take the white plastic clips attached to the bump strip and it fixes viat the 2 torx head self tappers at each end. All the doors are the same so will all have the relevant keyhole slots :y
-
mine has not got the keyhole slots :(
-
mine has not got the keyhole slots :(
I don't believe you ;D ;D ;D ;D Can you post a pic and I'll compare it to the facelift door I have here :y
-
(http://i9.photobucket.com/albums/a97/mantagte_/DSCF7354.jpg)
-
I see what you mean! Trim tape it is then as well as the screws at a guess :-/
-
anyone recomend a trim tape
-
His is a PREFACE remember.
No idea what tape to use, what about that mastic - "Sylcaflex" or summat?
mine has not got the keyhole slots :(
I don't believe you ;D ;D ;D ;D Can you post a pic and I'll compare it to the facelift door I have here :y
-
anyone recomend a trim tape
http://cgi.ebay.co.uk/DOUBLE-SIDED-CAR-BODY-TRIM-BADGE-NUMBER-PLATE-TAPE-12mm-/220600815948
-
cheers Rob :y
-
anyone recomend a trim tape
http://cgi.ebay.co.uk/DOUBLE-SIDED-CAR-BODY-TRIM-BADGE-NUMBER-PLATE-TAPE-12mm-/220600815948
That's the stuff ;)