Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Jimbob on 31 May 2010, 20:37:13

Title: Dead MAF diags
Post by: Jimbob on 31 May 2010, 20:37:13

Anyone who's looked at a 3.2 or 2.6 with a MAF issue.

Ever seen no reading at all?  0 Volts etc?

If so did a new one fix it, or where else should I look?

Cheers

Title: Re: Dead MAF diags
Post by: Marks DTM Calib on 31 May 2010, 20:39:56

Quote

Anyone who's looked at a 3.2 or 2.6 with a MAF issue.

Ever seen no reading at all?  0 Volts etc?

If so did a new one fix it, or where else should I look?

Cheers

Never seen one that bad.

It normaly reads high in my experience.

0 would sudgest an open circuit but it could be a very goosed sensor.....or another 'quirk' of the "My Naff Code Reader".

Title: Re: Dead MAF diags
Post by: same #same# on 31 May 2010, 20:40:34

had faulty pedometer and gave no volts to maf

Title: Re: Dead MAF diags
Post by: Jimbob on 31 May 2010, 20:43:06

Quote

Quote

Anyone who's looked at a 3.2 or 2.6 with a MAF issue.

Ever seen no reading at all?  0 Volts etc?

If so did a new one fix it, or where else should I look?

Cheers

Never seen one that bad.

It normaly reads high in my experience.

0 would sudgest an open circuit but it could be a very goosed sensor.....or another 'quirk' of the "My Naff Code Reader".

thought it sounded weird..

plus have to select model 01 not 02 for "My Naff Code Reader" to work at all...

a dodgy reading I would be 'happy' with but no response seems weird.

on clearing the permanent code, it went to intermittant  :-/

Title: Re: Dead MAF diags
Post by: Jimbob on 31 May 2010, 20:45:00

should add I reseated the connector with no difference, and it drives beautifully, lots of go.

Title: Re: Dead MAF diags
Post by: Marks DTM Calib on 31 May 2010, 20:45:31

I smell an "My Naff Code Reader" odditiy

Title: Re: Dead MAF diags
Post by: Jimbob on 31 May 2010, 20:47:16

If only it was insured....could have been on route for a tech2 in the morning  :y

(and on that note....can I get you to check out that cruise control abnormality where it doesnt engage till decent speeds, see if the tech2 can see a reason, cheers  :y)

Title: Re: Dead MAF diags
Post by: same #same# on 31 May 2010, 20:49:09

re install the drivers for "My Naff Code Reader" some driver issues

Title: Re: Dead MAF diags
Post by: Jimbob on 31 May 2010, 20:51:24

Quote

re install the drivers for "My Naff Code Reader" some driver issues

ill try it on a different computer and a different version tomorrow  :y

Title: Re: Dead MAF diags
Post by: same #same# on 31 May 2010, 20:54:11

had no prblems with "My Naff Code Reader"090821D, no faults try that one.

Title: Re: Dead MAF diags
Post by: Jimbob on 31 May 2010, 20:54:57

Quote

had no prblems with "My Naff Code Reader"090821D, no faults try that one.

it was  :y  can go back a fair few versions too, cheers  :y