Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: neil3l on 02 June 2010, 13:43:17

Title: Air Intake Sensor
Post by: neil3l on 02 June 2010, 13:43:17

EML light came on after cambelt change, check on tester shows air intake sensor, new one has made no difference, will reset but light came straight back on same fault, any clues?

Title: Re: Air Intake Sensor
Post by: andyc on 02 June 2010, 14:38:17

Had the same problem when i first got my car. Some before me had been playing and got the plug to the intake ram switch and the air temp switch the wrong way round.

if its a pre face life car the air temp sensor should be a white/grey colour connector and the ram valve connector is black

If they are the wrong way round just swap back and the light should go out

Cheers
Andy

Title: Re: Air Intake Sensor
Post by: Marks DTM Calib on 02 June 2010, 14:38:40

What year is it?

On early units its possible to get the multiram plug and air temp sensor plug mixed up.....the multiram plug should be the one on the longest bit of wire.

Title: Re: Air Intake Sensor
Post by: neil3l on 02 June 2010, 15:55:18

Result, thanks