Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: joff on 07 June 2010, 18:33:38

Title: re-set codes without tec2
Post by: joff on 07 June 2010, 18:33:38

Does any one know if you can re-set the codes without a tec 2 and if so how :-?

Title: Re: re-set codes without tec2
Post by: tunnie on 07 June 2010, 18:39:37

i think some cheapo ebay tech2's can clear codes

Title: Re: re-set codes without tec2
Post by: RobG on 07 June 2010, 20:46:44

Quote

Does any one know if you can re-set the codes without a tec 2 and if so how :-?

As Tunnie says. If you`re in Bristol @ any time :y

Title: Re: re-set codes without tec2
Post by: TheBoy on 07 June 2010, 21:46:40

in which ecu?

Title: Re: re-set codes without tec2
Post by: joff on 07 June 2010, 22:00:16

i want to remove the cat/lamba sensor codes to see if they come back now the sensors have been changed around. :-?

Title: Re: re-set codes without tec2
Post by: Entwood on 07 June 2010, 23:03:07

I have a code resetter for engine codes .. only down the road in Wootty B if you need them doing ...  :)

Title: Re: re-set codes without tec2
Post by: TheBoy on 07 June 2010, 23:07:13

Quote

i want to remove the cat/lamba sensor codes to see if they come back now the sensors have been changed around. :-?

Ah, engine ecu codes then :y

Entwood's gadget should do it, or a few clean starts.

Title: Re: re-set codes without tec2
Post by: joff on 08 June 2010, 13:44:53

Thanks to Entwood today for the code reset. Lambda's readings don't point to cat's so will now see if anything comes on over the next few days. thankyou again Entwood. :y