Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Raymienets on 09 June 2010, 18:24:55

Title: Gasket info needed.
Post by: Raymienets on 09 June 2010, 18:24:55
Have been searching the net also contacted a few company's without any help. Looking for an exhaust flange gasket for my 2.2cd. Unsure if it is flange or conical. Anyone replaced theres lately and can point me in the right direction also bore size if possible. Cheers in advance.
Title: Re: Gasket info needed.
Post by: Raymienets on 10 June 2010, 23:07:43
34 views and no replies. Help please.
Title: Re: Gasket info needed.
Post by: PhilRich on 10 June 2010, 23:14:48
Which joint do you need the gasket for? Is it the one between the Manifold & Downpipe? :-?
Title: Re: Gasket info needed.
Post by: Raymienets on 10 June 2010, 23:27:56
Quote
Which joint do you need the gasket for? Is it the one between the Manifold & Downpipe? :-?

No the end of the Cat connecting to the Mid section exhaust both have oval flanges but no one is unsure that gasket is used. Have tried instant but keeps blowing.
Title: Re: Gasket info needed.
Post by: andyc on 11 June 2010, 08:55:07
If its a 2.2 petrol there isn't a gasket listed as the down pipe has a tappered cone on the end that fits into the tappered end og the down pipe.

If its a 2.2 Diesel then it does have a gasket but its only a thin flat round one

Andy
Title: Re: Gasket info needed.
Post by: Andy B on 11 June 2010, 09:01:49
exhaust paste  ;)
(http://i.ebayimg.com/02/!Bn9iW1!Bmk~$(KGrHqQOKk!Etk21PVNZBLloWD12yg~~_35.JPG) (http://cgi.ebay.co.uk/Hylomar-Exhaust-Assembly-Paste-140G-Tube-/280345707824?cmd=ViewItem&pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item4145e80530)
Title: Re: Gasket info needed.
Post by: Raymienets on 11 June 2010, 16:17:50
Quote
If its a 2.2 petrol there isn't a gasket listed as the down pipe has a tappered cone on the end that fits into the tappered end og the down pipe.

If its a 2.2 Diesel then it does have a gasket but its only a thin flat round one

Andy


cheers