Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: zvi on 13 June 2010, 13:54:37

Title: MAF Sensor changed. still ERR code
Post by: zvi on 13 June 2010, 13:54:37

The EML don’t light any more.
but after rest the computer and a sort drive Pedal test shows 0173 0170 codes
please advice.

Title: Re: MAF Sensor changed. still ERR code
Post by: Jimbob on 13 June 2010, 14:05:17

some codes take 20 or so clean starts to self delete  :y

Title: Re: MAF Sensor changed. still ERR code
Post by: zvi on 13 June 2010, 17:31:08

I've reset the computer twice, after reset there was no errors.
But they come back.

Title: Re: MAF Sensor changed. still ERR code
Post by: Marks DTM Calib on 13 June 2010, 17:43:28

Is the fault light lit?

How is it driving now?

What are you using to clear the codes?

Title: Re: MAF Sensor changed. still ERR code
Post by: zvi on 13 June 2010, 17:53:53

Now the light stays off (lit before changing the sensor)
I can't fill any diffrent it drive wonderfull.
disconnect the battery for sev min.

Title: Re: MAF Sensor changed. still ERR code
Post by: Marks DTM Calib on 13 June 2010, 18:02:30

Ok, the method used to clear the codes does not work on these ecu's......you either need a proper code reader or it will need 25 clean starts/runs.

The fact the light is now off tells the story....no fault code present basicaly.

So just run it  :y

Title: Re: MAF Sensor changed. still ERR code
Post by: zvi on 13 June 2010, 18:15:02

TNX
clean starts from cold or any start?
becouse I think it had more then 25 but i'll wait for several days