Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: DanielF on 13 June 2010, 23:33:09

Title: EML light on, and fault code 0130...
Post by: DanielF on 13 June 2010, 23:33:09

Hi guys!

I have an Omega 2.0 16V 97mod. and the EML light comes on about 1 minute after I start the engine. I did the paperclip test and got the code 0130, indicating that there is a problem with the O2 sensor. Should I change it right away or is it something  else I should check to rule out any other problems that can give this fault?
Thanks!

Title: Re: EML light on, and fault code 0130...
Post by: same #same# on 14 June 2010, 08:49:34

is there any other faults, dose it run ok or is it in limp mode?

Title: Re: EML light on, and fault code 0130...
Post by: DanielF on 14 June 2010, 09:24:31

It seems to be running just fine.. At least I did not notice anything unusual...
Pleas help :o