Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Lee 7Star on 27 May 2010, 11:41:07
-
Can anyone shed any light on how this is done? The Elite seats are fully electric with the memory function, they are going into a MV6 with manual seats, Thx Lee
-
This should help Lee http://www.omegaowners.com/forum/YaBB.pl?num=1234703022
-
Thanks Rob, but would I remove the plug that goes into the power suppy input, (no.6), or just splice into the power supply input? Thx Lee
-
Right I did the above via splicing into the wires and the electric is seat now working :), is this the correct way of doing this?
-
Another update!! testing was done outside of the vehicle, when I put the seat into the car I found that after the wires were bridged that they didn' even need a separate +ve supply or -ve ground, so the job was much much easier than I first thought. Anyway hats off to the OOF ;)
-
Hi Lee,
A quick question, did you have the additional loom for the mirrors already in the MV6?
-
Hi Lee,
A quick question, did you have the additional loom for the mirrors already in the MV6?
No, he won't. Only Elites have this loom, and its challenging to retrofit, and not worth it for the limited gain (and you would need to change to elite mirrors)
-
That's a shame, my wife is a fair bit shorter than me, the mirrors to go with memory seats would have been perfect!