Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: greenman on 16 June 2010, 21:10:45

Title: exhaust flexi pipe
Post by: greenman on 16 June 2010, 21:10:45

exhaust flexi pipe kaput.going to weld in flexi insert.anybody any idea size of pipe bore to get.I know the length is 100mm but bore sizes available are 45,51,55mm. any help would be great.ps it,s a 2002 2.2 engine.

Title: Re: exhaust flexi pipe
Post by: same #same# on 16 June 2010, 23:32:00

if you gas weld it dont need an insert,, if you put an insert in it can make it stiffer and make it snap with engine movment.

Title: Re: exhaust flexi pipe
Post by: greenman on 16 June 2010, 23:44:21

Its a flexi pipe which is direct replacement for the original so should flex o.k. The problems the right bore size to get.

Title: Re: exhaust flexi pipe
Post by: RobG on 17 June 2010, 08:25:41

This is the one mate http://www.camskill.co.uk/products.php?plid=m15b0s1411p5644

Title: Re: exhaust flexi pipe
Post by: tunnie on 17 June 2010, 10:53:13

Quote

This is the one mate http://www.camskill.co.uk/products.php?plid=m15b0s1411p5644

Yup thats the one, bought 2 of them now for our 2.2's the second one was better quality than the first.

Title: Re: exhaust flexi pipe
Post by: greenman on 17 June 2010, 13:03:11

Ordered one today.Thanks to all.