Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Eadie on 22 June 2010, 19:45:08

Title: Replacing an Omega 2.0 16v (M-reg) ignition barrel
Post by: Eadie on 22 June 2010, 19:45:08

the ignition barrel has snapped,not to sure how to go about changing it,is it a job for a green horn like myself or is it best left to some one with more experience than myself all advice welcome

Title: Re: Replacing an Omega 2.0 16v (M-reg) ignition barrel
Post by: Entwood on 22 June 2010, 19:51:38

Have a read here ..

http://www.omegaowners.com/forum/YaBB.pl?num=1225659626

and here ..

http://www.omegaowners.com/forum/YaBB.pl?num=1225657771

and here ...

http://www.omegaowners.com/forum/YaBB.pl?num=1213353737

should give you some ideas .. :)

HTH

Title: Re: Replacing an Omega 2.0 16v (M-reg) ignition barrel
Post by: Eadie on 22 June 2010, 20:05:00

Thanks for the reply will give it a go myself,will post results