Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: leone on 02 July 2010, 19:50:34

Title: Fan belt snapped, requirng refit information with
Post by: leone on 02 July 2010, 19:50:34
Hey folks

my fan belt snapped on vaxhaul omega 2.5 TD i have purchased a new one and i can't figure out how to install it, if anyone would have a diagram i would be so appreciative for some help!Cheers!!  :y :y [smiley=thumbsup.gif]
Title: Re: Fan belt snapped, requirng refit information with
Post by: RobG on 02 July 2010, 20:09:34
Come on you tractor drivers :y :y :y :y
Title: Re: Fan belt snapped, requirng refit information with
Post by: Elite Pete on 02 July 2010, 20:40:47
I'll have a look in the morning ;)
Title: Re: Fan belt snapped, requirng refit information with
Post by: tunnie on 02 July 2010, 20:45:50
think the viscous fan needs to come off (reverse thread) then just slacken tensioner?  :-/
Title: Re: Fan belt snapped, requirng refit information with
Post by: Omegatoy on 02 July 2010, 22:02:45
damn if i could up load a photo here I would!! its pretty easy but can be a bit confusing if you have never done it before basically it goes round the outside but the two sides go in round the two small pulleys if that makes sense? right hand side as you look from the front of the car goes round the tensioner and the left side goes almost opposite on the small puley
Title: Re: Fan belt snapped, requirng refit information with
Post by: Shackeng on 02 July 2010, 22:53:12
The guide is here, http://www.omegaowners.com/forum/YaBB.pl?num=1264071895 but no pic of the routeing. Someone posted a drawing of the belt routeing a few weeks ago, but I can't find it, sorry.
Title: Re: Fan belt snapped, requirng refit information with
Post by: Entwood on 02 July 2010, 23:03:10
Hope this is the right one .. lifted from autodata ... as I don't have an oil burner I'm not certain,
 
2.5 DTI 2001 - 2003

(http://img149.imageshack.us/img149/5096/snapm.jpg)

If its wrong let me know and I'll look again

HTH


EDIT .. just found a load more pictures .. What year is yours ???

1996 - 2001 2.5 TD

(http://img80.imageshack.us/img80/9132/snapuk.jpg)



HTH  :)
Title: Re: Fan belt snapped, requirng refit information with
Post by: Shackeng on 02 July 2010, 23:08:05
That doesn't look familiar Nige, and tractors are turbo. :y
I'm busy AM tomorrow but, I'll have a look to remind myself later. :y

Edit: the bottom diagram looks very familiar, I think that is what I have, but need to confirm. :y
Title: Re: Fan belt snapped, requirng refit information with
Post by: Entwood on 02 July 2010, 23:14:21
Quote
That doesn't look familiar Nige, and tractors are turbo. :y
I'm busy AM tomorrow but, I'll have a look to remind myself later. :y


Think I've found and sorted it ... :)
Title: Re: Fan belt snapped, requirng refit information with
Post by: Shackeng on 02 July 2010, 23:25:37
Yep, looks good, either of those lower two, depending if AC fitted. :y
Title: Re: Fan belt snapped, requirng refit information with
Post by: leone on 03 July 2010, 20:22:54
gr8 job guys cheers :)
Title: Re: Fan belt snapped, requirng refit information with
Post by: Agemo on 03 July 2010, 22:46:00
Looks right
(http://i48.tinypic.com/5clvkp.png)
Title: Re: Fan belt snapped, requirng refit information with
Post by: Omegatoy on 04 July 2010, 07:12:52
Quote
Looks right
(http://i48.tinypic.com/5clvkp.png)

good picture!! thats what i was trying to explain in my post!!!
roun outside then the two side runs go in round the pulleys :y