Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Steveplumb on 18 July 2010, 16:12:40

Title: crank sensor replacement
Post by: Steveplumb on 18 July 2010, 16:12:40
Any tips, tricks, advice or 'how to' replace crank sensor on 2.2 03 estate.  Thanks ....   
Title: Re: crank sensor replacement
Post by: RobG on 18 July 2010, 16:35:08
Remove the heatshield from over the exhaust, 5 minute job, for easier access. Where the dipstick tube meets the block, feel towards front of engine about 50mm and you should catch the crank sensor. Bolt should be same size as heatshield one. If you can`t manage that way it`s a case of slipping aux belt, unbolt PAS pump (and possibly A/C compressor) move away and access it from there. :y