Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: RossMk2 on 23 July 2010, 18:59:02
-
Not a good picture but i need a short, early black plastic plenium top like this:
(http://i30.photobucket.com/albums/c348/ross_mk2/fuelrail.jpg)
as i want to try to get the breather pipes set back up, any ideas where you can get them?
-
I've got one - but the 4 pipes look longer than in your picture
-
I've got one - but the 4 pipes look longer than in your picture
No thats right, on mine there were chopped :( thats what i want to get around eventually making custom breather pipes
-
Is the plastic thick enough to drill out the holes slightly and fit metal spigots?
-
Ok, so are you interested in my standard one?
-
is it just me or is the complete inlet on backwards?
You can still get that part from vxm but you'll be better off finding s good second hand one, trade price is £54.00 + VAT
Andy
-
is it just me or is the complete inlet on backwards?
You can still get that part from vxm but you'll be better off finding s good second hand one, trade price is £54.00 + VAT
Andy
From memory, this is in his Mk2 Astra, so I guess plenum on that way due to challenges of mounting in that car :y
-
is it just me or is the complete inlet on backwards?
Sideways actually! ;) The engine's in an Astra :y
You can still get that part from vxm but you'll be better off finding s good second hand one, trade price is £54.00 + VAT ....
:o :o
-
is it just me or is the complete inlet on backwards?
Sideways actually! ;) The engine's in an Astra :y
You can still get that part from vxm but you'll be better off finding s good second hand one, trade price is £54.00 + VAT ....
:o :o
Its sideways and then the inlet is also backwards!
Dont think it would be wise to drill out the plastic, why what are you thinking?
How much do you want for it mate? Only difference i see with the thing is on most its got a cover and the screw is undernearth, mine is all just one piece