Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: SP_3.2 on 01 August 2010, 18:48:54

Title: Dirver side mirror fitting now fitted
Post by: SP_3.2 on 01 August 2010, 18:48:54

Just to check, as getting a replacement for mine.

Is it just a case of removing the cover of the inside of the mirror casing and taking out the 3 screws. I,m replacing like for like which is a facelift elite.

Thanks
Steve :y
Steve.


Now fitted many thanks all. And Big thanks to Tunnie for the How to  on removing the door card. :y

Title: Re: Dirver side mirror fitting
Post by: Agemo on 01 August 2010, 19:15:01

I assume you are replacing the complete mirror, make sure you get one with memory.  ::)

Title: Re: Dirver side mirror fitting
Post by: SP_3.2 on 01 August 2010, 19:29:40

Quote

I assume you are replacing the complete mirror, make sure you get one with memory.  ::)

yep on it,s way with memory :y just not sure about the fitting. 

Title: Re: Dirver side mirror fitting
Post by: nell77 on 01 August 2010, 19:33:43

As you have put pull the inside trim off x3 phillips screws unplug old unit and reverse process 10min job

Title: Re: Dirver side mirror fitting
Post by: SP_3.2 on 01 August 2010, 19:35:20

Great  :y Thanks

Title: Re: Dirver side mirror fitting
Post by: TheBoy on 01 August 2010, 19:39:39

Don't quote me, think you need to remove doorcard to get to the connector...

Title: Re: Dirver side mirror fitting
Post by: charlie on 01 August 2010, 21:13:06

Door trim off to get too one of the 10mm bolts  :y

Title: Re: Dirver side mirror fitting
Post by: unlucky mark mv6 on 01 August 2010, 23:33:27

Quote

Don't quote me, think you need to remove doorcard to get to the connector...

Yep confirmed,you can get away with just releasing a couple of the screws in the door card to get to the bolt,its a bit fiddly but doable. :y