Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Boditza on 02 August 2010, 07:19:08
-
some kids tryed to remove one of mine and broke the housing but the noozles are still there. i want to replace it but i don't know how to take the old one out. can someone post some pics here please?
-
Bumper off, then you can see the clip that holds the nozzles in place :y
-
Bumper off, then you can see the clip that holds the nozzles in place :y
pffff.. i was afraid of that :(
hoped there is a easyer way
-
Bumper off, then you can see the clip that holds the nozzles in place :y
pffff.. i was afraid of that :(
hoped there is a easyer way
Bumper off is easy enough, only fiddly bit is the trim under the headlight with a tab that pushes out from the back, the rest are screws and push through pegs in the plastic clips... May not need to undo the clips under/behind the skirt, just undonthe sides and lean it forward.???
What do kids want with it anyway...? :-/
-
Bumper off, then you can see the clip that holds the nozzles in place :y
pffff.. i was afraid of that :(
hoped there is a easyer way
It is easy ;) :y
-
Bumper off, then you can see the clip that holds the nozzles in place :y
pffff.. i was afraid of that :(
hoped there is a easyer way
Bumper off is easy enough, only fiddly bit is the trim under the headlight with a tab that pushes out from the back, the rest are screws and push through pegs in the plastic clips... May not need to undo the clips under/behind the skirt, just undonthe sides and lean it forward.???
What do kids want with it anyway...? :-/
i'm just guessing they were kids because they were playing near the car when i left it and when i came back it was smashed and no kid around.. anyway i will try to remove it myself and see what comes out of it :)