Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: ram 428 on 03 August 2010, 17:08:00

Title: Head Gasket replacement - Over heating
Post by: ram 428 on 03 August 2010, 17:08:00
Hi/

Car lost power today. Suspected head gasket failure (white smoke and water out of exhaust pipe), this was due to the car overheating (fans never kicked in). The Omega is an ex-police MV6 with only 66,000 miles on the clock (W reg). Is it easy for the head gaskets to be replaced, i have replaced both rocker cover gaskets previously, so i have already stripped the top part of the engine. Any advice?

Thanks,
Jamie
Title: Re: Head Gasket replacement - Over heating
Post by: Elite Pete on 03 August 2010, 19:51:34
Its quite a bit more involved then the cam cover gaskets. You'll have to remove the cambelt, cams, down pipes ect.
Title: Re: Head Gasket replacement - Over heating
Post by: ram 428 on 03 August 2010, 20:13:55
Do you think its worth while or is there a point enough is enough, i.e now
Title: Re: Head Gasket replacement - Over heating
Post by: davethediver on 03 August 2010, 22:50:52
Depends on how much it would cost you to replace the car as opposed to fix it :-/
Title: Re: Head Gasket replacement - Over heating
Post by: Rizo on 03 August 2010, 23:08:30
if you did all the work yourself you would be looking around £250-300 in parts including Gasket set, Waterpump, Cambelt and tensioners etc

450 will see the gaskets replaced, oilcooler, waterpump, cambelt kit and any fluids/filter required

im lucky that i can do all the work myself but some just havent got the choice.  at a garage i would figure about £800-1000 for HG change with parts.

hth

Title: Re: Head Gasket replacement - Over heating
Post by: ram 428 on 04 August 2010, 11:24:16
I have no problems dismantling the engine, its just when coming to the cambelt and ensuring they line up when instaling the new belt etc. Any suggestion or previous experience?

Many Thanks
Title: Re: Head Gasket replacement - Over heating
Post by: PhilRich on 04 August 2010, 15:13:10
DVD available from the OOF shop for not a lot of money :y
You will need to buy/hire/borrow a V6 cam locking kit though ::)



http://www.omegaowners.com/forum/YaBB.pl?num=1156070744

Title: Re: Head Gasket replacement - Over heating
Post by: ram 428 on 04 August 2010, 15:51:58
Hi/

It says the dvd is out of stock. Has anyone got a copy i could borrow.

Thanks,
Jamie
Title: Re: Head Gasket replacement - Over heating
Post by: Jimbob on 05 August 2010, 07:07:54
[split] [link=http://www.omegaowners.com/forum/YaBB.pl?num=1280958579/0#0][splithere][/link][splithere_end]