Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: fastcav on 12 August 2010, 18:47:19
-
Fitted a set of facelift xenons to the barge, discovered that they illuminated the front bumper quite well so i got a pair of aluminium adjusters off flea bay and fitted them, can see in the dark now, but inside the headlight, where you would access the main beam and sidelight bulbs there is a metal lever, what is it for cos i was playing with it? Maybe i shouldnt have, but it was there and i just had to, bit like a big red button that says dont push.......... ;)
-
Fitted a set of facelift xenons to the barge, discovered that they illuminated the front bumper quite well so i got a pair of aluminium adjusters off flea bay and fitted them, can see in the dark now, but inside the headlight, where you would access the main beam and sidelight bulbs there is a metal lever, what is it for cos i was playing with it? Maybe i shouldnt have, but it was there and i just had to, bit like a big red button that says dont push.......... ;)
;D ;D ;D
it flattens the headight beam for continental driving.
reset it against a wall pre mot :y
(done exactly the same)
-
Spotty dogs mate, thanks
going to look for more big red buttons ::) ::)
-
Yeah as stated (and in handbook) for adjusting beam to suit continental driving.
-
One lever should be up and the other lever should be down. Dont ask me which side is which though ;D ;D ;D
-
Hand? Book? Are they not supposed to be used for mixing isopon on? I'll wait till its dark and point them at the side of the house and play with them again, but have just burst a intercooler pipe, so i'll probably just end up parking it in a huff and using the vectra for a couple of days :-[
-
Hand? Book? Are they not supposed to be used for mixing isopon on? I'll wait till its dark and point them at the side of the house and play with them again, but have just burst a intercooler pipe, so i'll probably just end up parking it in a huff and using the vectra for a couple of days :-[
That would be like reading instructions ::) ::) ::)
-
Hand? Book? Are they not supposed to be used for mixing isopon on? I'll wait till its dark and point them at the side of the house and play with them again, but have just burst a intercooler pipe, so i'll probably just end up parking it in a huff and using the vectra for a couple of days :-[
That would be like reading instructions ::) ::) ::)
Only to be attempted once all else has failed!! ;D ;D
-
Instructions are for the weak, and only to be read in a dark room so no one will doubt your infallibility, on a similar note i'm going to stop saying to myself 'i shall remove this bottom intercooler pipe with a hacksaw, nobodys ever going to need one of those. D'ohhhhhhhhh!!! :-X :-X
-
Spotty dogs mate, thanks
going to look for more big red buttons ::) ::)
have you fitted headlight washers too? or got them already?
-
Its an elite so it already had the headlight washers on it but as theyre the earlier type one of the nozzles broke when i was removing them to fit the headlights, so now one washes the headlight and the other fires a stream of water about ten feet in front of the car, funny when sitting at pedestrian crossings and such, i was going to fit the facelifted bumper which has the nozzles in the bumper instead, but i think theyre hideous, they just really dont suit the car at all, and its starting to grow on me with the facelift bonnet and pre facelit bumper, just need to paint the damn thing ;D if i can figure out how to post pics i will
-
Its an elite so it already had the headlight washers on it but as theyre the earlier type one of the nozzles broke when i was removing them to fit the headlights, so now one washes the headlight and the other fires a stream of water about ten feet in front of the car, funny when sitting at pedestrian crossings and such, i was going to fit the facelifted bumper which has the nozzles in the bumper instead, but i think theyre hideous, they just really dont suit the car at all, and its starting to grow on me with the facelift bonnet and pre facelit bumper, just need to paint the damn thing ;D if i can figure out how to post pics i will
LOL! :y
-
Hand? Book? Are they not supposed to be used for mixing isopon on? I'll wait till its dark and point them at the side of the house and play with them again, but have just burst a intercooler pipe, so i'll probably just end up parking it in a huff and using the vectra for a couple of days :-[
That would be like reading instructions ::) ::) ::)
What the Hell does that mean? ;D