Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Teebee on 17 August 2010, 10:05:57
-
I mentioned a few weeks back that my estate has the rear centre belt missing, my plan was to replace it or the seats. Unfortunately my cash is now being used on the MOT so I need a bodge.
Simply put when I attempt to fold the seats down they don't lay flat, they twist inwards. I pulled the lower pad and spotted that the centre bracket that secures the seats to the floorpan is a mass of bent and ripped metal (I assume it has seized at some point).
The question is can you easily replace that bracket or is it integral to one side of the seat. I would normally just remove it to check but i'm off on holiday in Sept and dont want to get them out and find I cant get them back in.
-
as far as i can see on mine the bracket comes off the seat and the body so you can replace it. just been out and looked and i have passanger side lap belt and buckle in black you can have for cost of postage. :y
-
Thanks for the offer but it's my centre belt thats missing, the awkward one to replace >:(
-
its the center lap belt from the early seats