Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Iain on 27 August 2010, 18:50:44

Title: Part number help
Post by: Iain on 27 August 2010, 18:50:44

Can anyone tell me the GM part number for :-

Front Discs
Rear Discs

Ta much  :y

Title: Re: Part number help
Post by: RobG on 27 August 2010, 19:58:39

Rears   Solid discs/drums to '00 90444513 £94.00 £79.96 £65.81
Front disc & pads All models exc. 2.0 to '97 93175466 £109.00 £89.98 £80.15
Not sure of part # just for front discs only

Title: Re: Part number help
Post by: Iain on 27 August 2010, 20:15:25

Cheers Rob.... :y

I have got a set organised from Irmscher Jim, but we cant figure out if they are fronts or back! just wanted to check the part number to see if they will fit mine

Title: Re: Part number help
Post by: RobG on 27 August 2010, 20:20:41

Quote

Cheers Rob.... :y

I have got a set organised from Irmscher Jim, but we cant figure out if they are fronts or back! just wanted to check the part number to see if they will fit mine

Uhhhhhhh rear discs incorporate the drum for the handbrake shoes ::) ::) and if they`re rears and vented won`t be any good for yours

Title: Re: Part number help
Post by: Iain on 27 August 2010, 20:32:43

Yeah i know mate, but looking at them, it looks a bit like the innner part could take a shoe, ive done plenty of discs in the past but ive never needed to on a Miggy so i have nothing to compare them with.....

If that makes sense? Im sure there fronts,but what i dont want to do is strip it all done to discover there rears!! :o  ;D

Title: Re: Part number help
Post by: RobG on 27 August 2010, 20:36:57

If they`re fronts and 296mm diameter they`ll be vented,

Title: Re: Part number help
Post by: RobG on 27 August 2010, 20:41:57

Pic of a rear vented disc (http://i440.photobucket.com/albums/qq121/ptrkp/Omega/remmen/479853d4.jpg)

Title: Re: Part number help
Post by: Iain on 27 August 2010, 20:45:09

These ones are vented Jim has,but they could look like that ^  :-/

Confused.com! ;D

Title: Re: Part number help
Post by: CaptainZok on 27 August 2010, 20:46:04

What part number is on them?

Title: Re: Part number help
Post by: Iain on 27 August 2010, 20:48:04

Ah!! the front disc securing allen bolts will be opposite each other wont they? not close together like the pic..

Title: Re: Part number help
Post by: Kneepad on 27 August 2010, 21:17:45

There's only one allen bolt on each disc.  The other hole is for adjusting the shoes.

Title: Re: Part number help
Post by: Kneepad on 27 August 2010, 21:23:18

Quote

Yeah i know mate, but looking at them, it looks a bit like the innner part could take a shoe, ive done plenty of discs in the past but ive never needed to on a Miggy so i have nothing to compare them with.....

If it looks like it can take a shoe, then it will. they are rears.

The front disc is just a flat disc.    :y

Title: Re: Part number help
Post by: Proz on 27 August 2010, 21:24:19

Those ones pictured have the extra holes for poking through to slacken of handbrake adjusters etc ... fronts just have the one extra hole for the allen bolt thingy  :y

Title: Re: Part number help
Post by: Iain on 27 August 2010, 21:29:36

Dont have the part number to hand...

So fronts will have 5 wheel bolt holes and only one more hole?

Title: Re: Part number help
Post by: Proz on 27 August 2010, 21:41:24

Quote

Dont have the part number to hand...

So fronts will have 5 wheel bolt holes and only one more hole?

Correct  :y

Title: Re: Part number help
Post by: Iain on 27 August 2010, 21:48:31

Ok,im switched on now  :y

As long as they have 6 holes, there fronts, anymore....forget it! ;D