Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: osealy on 06 September 2010, 22:30:18

Title: No Demist! Servo?
Post by: osealy on 06 September 2010, 22:30:18
No real demist! I guess an arm has fallen off a servo, which side of tunnel is this on? or other ideas?
Title: Re: No Demist! Servo?
Post by: Vamps on 06 September 2010, 23:18:26
Is it a broken pipe, it was on our old estate, after being in VX for a cam belt change, pipe not secured properly and melted on the exhaust manifold.. ::)
Title: Re: No Demist! Servo?
Post by: tutts on 07 September 2010, 07:47:09
I am having the same problems i found a loose vacuum pipe under the bonnet near the heater matrix pipes on the bulkhead bu still not working,i will be looking for the heater box flap actuator at weekend i will keep you posted.Take a look at my other post on vac pipes. :-[
Title: Re: No Demist! Servo?
Post by: osealy on 07 September 2010, 09:32:24
This car has climate, I think all the flaps are operated by servomotors whose arms pop off, they are awkward to get at & I don't want to start on the wrong side.
Title: Re: No Demist! Servo?
Post by: Marks DTM Calib on 07 September 2010, 10:16:04
Nope, only the temp blend flap is servo controled, all the direction flaps are vac based and hence you need to check your vac hoses etc  :y
Title: Re: No Demist! Servo?
Post by: osealy on 07 September 2010, 13:07:10
Thanks for that. On my previous car it was the temp blend arm that popped off! But I thought I saw at least one other servo?
Title: Re: No Demist! Servo?
Post by: Marks DTM Calib on 07 September 2010, 13:37:03
Quote
Thanks for that. On my previous car it was the temp blend arm that popped off! But I thought I saw at least one other servo?


Correct there is....for the passenger side temp blend  :y