Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: gsizoli on 05 September 2010, 14:32:19

Title: Irmscher rear lip spolier
Post by: gsizoli on 05 September 2010, 14:32:19: Hi!

Can anybody send me the installation guide of the i4001431 Irmschr rear lip spolier?As I remember Irmscher has an installation documentation, but i can't find it anywhere...
Br
Zoli
Title: Re: Irmscher rear lip spolier
Post by: Dany on 05 September 2010, 15:40:40: It's for preface mate, but I believe it's still the same method :y

Pics and fitting instruction begins p13.

http://www.irmscher.de/abe/de/de/7_40_01_401_402.pdf
Title: Re: Irmscher rear lip spolier
Post by: duggs on 05 September 2010, 19:01:48: Crude huh...Screw it on through the metal of the boot lid. REALLY would have thought the Germans could have come up with something better than that.
Title: Re: Irmscher rear lip spolier
Post by: Proz on 05 September 2010, 19:03:30: Or forget the screws and use Sikaflex :y
Title: Re: Irmscher rear lip spolier
Post by: gsizoli on 06 September 2010, 21:29:58: Thanks for the answers, I have BETALINK glue and I hope it will be OK for fix this spolier, I don't want to use screws because I don't want to drill through the boot...
Title: Re: Irmscher rear lip spolier
Post by: gsizoli on 06 September 2010, 21:35:29: i've found it....
http://www.irmscher.de/abe/de/de/7_40_01_431.pdf

Thanks
Title: Re: Irmscher rear lip spolier
Post by: gsizoli on 09 September 2010, 14:48:41: I'm a little bit angry. The spoiler doesn't fit 100% correctly, so big effort needed to lay it correctly to the whole boot. Is it normal? As I know neither of the boot and spoiler is repaired...
Title: Re: Irmscher rear lip spolier
Post by: Proz on 09 September 2010, 15:18:53: I had to use tape to hold mine when i put mine on as mine needed a little persuasion to fit .... maybe yours is warped or something ... :-/

(http://i509.photobucket.com/albums/s337/Prozmonkey/IMG_0042.jpg)

I then used some old washing line and tied that round as well to ensure a good bond .

The result was worth being carefull though i think :y
(http://i509.photobucket.com/albums/s337/Prozmonkey/IMG_0052.jpg)
Title: Re: Irmscher rear lip spolier
Post by: gsizoli on 09 September 2010, 15:28:43: Do you have a picture from your car at the rear??
Title: Re: Irmscher rear lip spolier
Post by: Proz on 09 September 2010, 15:29:14: Quote
Do you have a picture from your car at the rear??

Yep ... just a moment :y
Title: Re: Irmscher rear lip spolier
Post by: Proz on 09 September 2010, 15:30:41: Is this ok or do you need closer ??
Mind you mine is the Pro Drive spoiler but i wouldnt have thought they would be that different :-/

(http://i509.photobucket.com/albums/s337/Prozmonkey/100_0384.jpg)
Title: Re: Irmscher rear lip spolier
Post by: Proz on 09 September 2010, 15:56:35: Was just looking at the fitting instructions in the link you posted .
That is for a pre-facelift spoiler , you say you have a facelift so if you have the spoiler for a pre-face lift i dont think it will fit .
Does my rambling make sense ;D :-[
Title: Re: Irmscher rear lip spolier
Post by: gsizoli on 09 September 2010, 19:20:03: The fitting instructions is really for B1 Omegas (I don't know why hasn't done irmscher a new one), but the spoiler number is i4001431 which is made for Facelift's. B1 Omega's Irmscher spoiler nuber is i4001401. So I think I have the correct spoiler. Thanks for the picture but I think it's not exactly the same as mine. I think mine spoiler must install closer to the rear lights...
Title: Re: Irmscher rear lip spolier
Post by: gsizoli on 09 September 2010, 19:51:49: Yes, yours are different. Mine is:
http://www.omegaowners.com/forum/YaBB.pl?num=1221532637/0
Title: Re: Irmscher rear lip spolier
Post by: Proz on 09 September 2010, 20:00:05: Should still be a straight forward fit unless its gotten warped or bent somehow or its not the right one .