Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Raymienets on 09 September 2010, 11:47:07

Title: Code help Please.
Post by: Raymienets on 09 September 2010, 11:47:07: Just stuck a code reader on the miggy and got this

Total number of fault codes: 1

P1555 - Throttle Position Sensor (TPS) Load Signal not Plausible with Engine Load.

What does it mean. :question
Title: Re: Code help Please.
Post by: Proz on 09 September 2010, 11:48:45: A broken throttle position sensor or wiring i would assume ... did it say if it was "Present" or "Not Present :y
Title: Re: Code help Please.
Post by: Raymienets on 09 September 2010, 11:51:04: Never noticed to be honest. Were is it located to check
Title: Re: Code help Please.
Post by: Proz on 09 September 2010, 11:54:09: There will be an electrical plug on the trottle body ... dont know if there is another on the pedal .
Title: Re: Code help Please.
Post by: Raymienets on 09 September 2010, 12:25:02: Throttle body ?. Not mechanically minded
Title: Re: Code help Please.
Post by: Proz on 09 September 2010, 12:33:55: Niether am i but this may help :y

http://www.omegaowners.com/forum/YaBB.pl?num=1279574806
Title: Re: Code help Please.
Post by: Raymienets on 09 September 2010, 13:07:00: Quote
Niether am i but this may help :y

http://www.omegaowners.com/forum/YaBB.pl?num=1279574806

Thank You
Title: Re: Code help Please.
Post by: zvi on 09 September 2010, 17:07:03: It's not exactly the same code I had. But after cleaning it's gone. you can see here.
http://www.omegaowners.com/forum/YaBB.pl?num=1276883719/2#2
Title: Re: Code help Please.
Post by: Raymienets on 09 September 2010, 22:32:28: Quote
It's not exactly the same code I had. But after cleaning it's gone. you can see here.
http://www.omegaowners.com/forum/YaBB.pl?num=1276883719/2#2

Cheers for that will try giving it a clean over the weekend.
Title: Re: Code help Please.
Post by: RobG on 09 September 2010, 23:20:36: Another TPS on the throttle pedal. Might be worth whipping the pedal off and cleaning the tracks on that one as well
Title: Re: Code help Please.
Post by: Raymienets on 09 September 2010, 23:50:52: Quote
Another TPS on the throttle pedal. Might be worth whipping the pedal off and cleaning the tracks on that one as well

Is the pedal easy to remove?
Title: Re: Code help Please.
Post by: TheBoy on 10 September 2010, 08:10:25: Before going to great lengths, simply clear the code and see if it comes back - for all we know, it could be a 10yr old code about a fault long since fixed ;)
Title: Re: Code help Please.
Post by: Proz on 10 September 2010, 08:11:31: Quote
Before going to great lengths, simply clear the code and see if it comes back - for all we know, it could be a 10yr old code about a fault long since fixed ;)

Thats why i asked if it was "Present" or not :y
Title: Re: Code help Please.
Post by: TheBoy on 10 September 2010, 08:12:29: Quote
Quote
Before going to great lengths, simply clear the code and see if it comes back - for all we know, it could be a 10yr old code about a fault long since fixed ;)

Thats why i asked if it was "Present" or not :y
I know ;)
Title: Re: Code help Please.
Post by: Raymienets on 10 September 2010, 16:16:15: Quote
Quote
Quote
Before going to great lengths, simply clear the code and see if it comes back - for all we know, it could be a 10yr old code about a fault long since fixed ;)

Thats why i asked if it was "Present" or not :y
I know ;)

Haven't done anything about it yet as code has not reappeared yet. But thanks for the advice all. :y
Title: Re: Code help Please.
Post by: Iain on 11 September 2010, 11:23:57: Still welcome to bring your motor over to mine mate :y
Title: Re: Code help Please.
Post by: Raymienets on 11 September 2010, 13:31:44: Quote
Still welcome to bring your motor over to mine mate :y

PM sent
Title: Re: Code help Please.
Post by: Iain on 11 September 2010, 13:33:23: Ive not got a PM mate?
Title: Re: Code help Please.
Post by: Raymienets on 11 September 2010, 13:35:24: Are you free this afternoon mate?
Title: Re: Code help Please.
Post by: Iain on 11 September 2010, 13:49:33: The post code will bring you past my house a wee bit,but you will see the Miggy as you turn in the street :y
Title: Re: Code help Please.
Post by: Iain on 11 September 2010, 15:14:33: I'm back home now mate,so anytime you want :y
Title: Re: Code help Please.
Post by: Raymienets on 11 September 2010, 17:29:17: Got her home at a snails pace. Thanks for your help. :y
Title: Re: Code help Please.
Post by: Iain on 11 September 2010, 17:46:45: Your welcome mate :y
Title: Re: Code help Please.
Post by: Raymienets on 13 September 2010, 10:43:59: Hub stripped down awaiting bearing hopefully problem sorted.