Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: bob.dent on 27 September 2010, 18:38:32

Title: MID check warning?
Post by: bob.dent on 27 September 2010, 18:38:32

I know this has been covered before but can't find the threads. I'm getting Low Beam Fld/vision check coming up on the MID - what is the cause?

Title: Re: MID check warning?
Post by: jonnycool on 27 September 2010, 19:00:49

It's a problem with your self-levelling headlights - either a sensor arm has popped off its socket on the wishbone at the front of the car or on the suspension on the n/s back, or a levelling sensor has gone kaputt, or the levelling motor has gone on one of the headlights

Title: Re: MID check warning?
Post by: bob.dent on 27 September 2010, 19:20:47

Quote

It's a problem with your self-levelling headlights - either a sensor arm has popped off its socket on the wishbone at the front of the car or on the suspension on the n/s back, or a levelling sensor has gone kaputt, or the levelling motor has gone on one of the headlights

Ah yes, that rings a bell now, thanks for that. :y Looks like a trip back to the garage then to find out which of those is causing the problem.

Title: Re: MID check warning?
Post by: bob.dent on 28 September 2010, 19:59:11

Turns out to be the nearside front wishbone sensor is broken so if anyone has spare one will willingly buy. :y

Title: Re: MID check warning?
Post by: TheBoy on 28 September 2010, 20:07:58

Bob - PM me you address, I'll post you one.

If the connector is the same, dead easy to change.  There are 2 different connectors, I will post some loom as well, but that will need soldering if yours is the other type.

Title: Re: MID check warning?
Post by: bob.dent on 28 September 2010, 20:16:07

Quote

Bob - PM me you address, I'll post you one.

If the connector is the same, dead easy to change.  There are 2 different connectors, I will post some loom as well, but that will need soldering if yours is the other type.

Cheers Jaime, you're a star - PM sent. :y