Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: sierrapaul on 02 October 2010, 16:48:40
-
does anybody know how to fit 1 of these to a 3 litre elite auto?.any ideas pls ta paul
-
I think you'd have your work cut out due to the mounting of the standard FPR on the fuel rail, which is hidden under the Plenum.
It won't give any benefits either, IMHO, as the extra fuel will just be trimmed out by the ECU.
Kevin
-
ok thanks mate.il give it a miss
-
just checked Total Vauxhall mag-feb 05
you have to remove the pressure regulator from rail -replace with FSE part(just acts as a flow through instead)
Then you cut fuel line (1 nearest bulkhead) use rubber pipe to connect toFSE PRESSURE REG.
mount down by expansion tank on inner wing.
hope that helps you out,