Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: graham-mv6 on 03 October 2010, 08:56:49

Title: 2.6 ecu problem? help needed urgent
Post by: graham-mv6 on 03 October 2010, 08:56:49
My 2.6 was converted to manual and has been playing up since, engine management light comes on after ecu cleared in a couple of miles comes bk on, saying missfire 1,3 and 5 if ecu is cleared it drives fine again.  What can i do with her :(
Title: Re: 2.6 ecu problem? help needed urgent
Post by: Martin_1962 on 03 October 2010, 09:44:38
New 135 coil pack
Title: Re: 2.6 ecu problem? help needed urgent
Post by: graham-mv6 on 03 October 2010, 11:53:52
changed coil pack for one i knew was working :(
Title: Re: 2.6 ecu problem? help needed urgent
Post by: Martin_1962 on 03 October 2010, 21:01:41
Hmm - when I had the 0300 0301 0303 0305 the coil pack fixed it.

Check for damp at the ECU connector?
Title: Re: 2.6 ecu problem? help needed urgent
Post by: feeutfo on 03 October 2010, 21:32:20
Plugs? Old or loose?
Title: Re: 2.6 ecu problem? help needed urgent
Post by: TheBoy on 04 October 2010, 09:01:59
Engine earths ;)

Also, Engine, ABS and MID will all need reprogramming for new drivetrain config.
Title: Re: 2.6 ecu problem? help needed urgent
Post by: 2woody on 04 October 2010, 19:46:42
lambda sensor i reckon - on the bank with the fault codes.