Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Olympia5776 on 17 October 2010, 19:41:42

Title: Estate rear bumper removal.
Post by: Olympia5776 on 17 October 2010, 19:41:42

Got a reversing sensor kit to fit to a facelift estate .
What fixings hold the rear bumper on ?

Title: Re: Estate rear bumper removal.
Post by: Welung666 on 17 October 2010, 21:27:20

2 torx screws each side at the wheel arch (one from underneath and one at the top edge inside the arch), then 4 capped torx screws under the bottom edge of the tailgate. Not sure if there are push clips underneath the bumper, there are on saloons.