Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: david2310 on 19 October 2010, 19:35:10
-
hi does anybody no the camber setting for 2000 omega 2.5 cdx as i changed my shocks and taken it into kwikfit to check them, as they was closing i didnt expect them todo anything but check them they said n/s 1.2 and o/s 2.0 does this mean anything to anybody? and what should they be help please thank you
-
Usual qwiqfit
it should be -1.10 thats negative camber yours is positive i would suspect it would be virtually undrivable with that setting if it is indeed positive camber even if it was negative it would be pulling badly to oneside
Rob
-
sorry i missed out the negitive it should of read -1.2 n/s and -2.0 o/f sorry about that and i have 16inch rims dont know if that makes a difference
-
-1.2 is ok but the -2.0 is way to deep.
-
I run -2.0 on one car, BUT it's a track car, and I'm really only after camber-thrust at the expense of tyre wear.
factory settings best for road use.