Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: manolo on 22 October 2010, 16:54:17

Title: P1612 1613
Post by: manolo on 22 October 2010, 16:54:17
what means code 1612 1613 ???

history topic on:
http://www.omegaowners.com/forum/YaBB.pl?num=1287658148

Title: Re: P1612 1613
Post by: aaronjb on 22 October 2010, 17:33:04
P1612 Immobiliser No Or Wrong Signal Immobiliser
P1613 Immobiliser No Or Wrong Signal Immobiliser

The list is in the Maintenance Guides: http://www.omegaowners.com/forum/YaBB.pl?num=1220619696
Title: Re: P1612 1613
Post by: manolo on 22 October 2010, 17:42:32
Quote
P1612 Immobiliser No Or Wrong Signal Immobiliser
P1613 Immobiliser No Or Wrong Signal Immobiliser

The list is in the Maintenance Guides: http://www.omegaowners.com/forum/YaBB.pl?num=1220619696

but still dont know whai it means  :-?
Title: Re: P1612 1613
Post by: aaronjb on 22 October 2010, 17:52:05
It means the immobiliser received either no signal from the transponder, or the wrong signal (i.e. the wrong transponder)..

So either someone tried to hotwire the car or start it with the wrong key - I seem to remember someone saying these codes are never erased, so that could have happened years ago and the codes would still be reported.
Title: Re: P1612 1613
Post by: Jimbob on 22 October 2010, 18:08:55
yes those are permanent codes, will remain unless you put it on a code reader and delete them

If the car starts...they are nothing to worry about, only a problem if the EML flashes and the car wont start.

so, ignore :y
Title: Re: P1612 1613
Post by: manolo on 22 October 2010, 23:01:28
how to delete them, disconecting batery erase code and leither after fault come back
I drive that car for 3 years with no problem
and now I ofen must start from 2th times
Title: Re: P1612 1613
Post by: aaronjb on 22 October 2010, 23:04:27
Quote
how to delete them
I drive that car for 3 years with no problem
and now I ofen must start from 2th times

Jimbob already told you the answer to that part...


Quote
yes those are permanent codes, will remain unless you put it on a code reader and delete them

If the car starts...they are nothing to worry about, only a problem if the EML flashes and the car wont start.

so, ignore :y



However - is the engine management light flashing when you try and fail to start the car?  If so it is indicating a problem with the immobiliser and those codes are probably current codes and not old stored codes.