Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Cav9_4 on 25 October 2010, 16:22:03

Title: Fault code 19
Post by: Cav9_4 on 25 October 2010, 16:22:03

Hi all,my Omega broke down on me this morning,read codes which gave me the 19,replaced the crank sensor but the 19 is still there,gave it a good 30 mile drive and all seemed to be ok,will the code clear after 20 or so clean starts?...many thanks..Wayne

Title: Re: Fault code 19
Post by: pscocoa on 25 October 2010, 16:38:08

yes should clear - you can reset with code reader of course

Title: Re: Fault code 19
Post by: Cav9_4 on 25 October 2010, 16:41:41

Thanks for reply,i do have a sealey vs8700 code reader,read every car i've tried it on except....yes thats right,mine!,hopefully should be ok then...Thanks..Wayne

Title: Re: Fault code 19
Post by: eco16v on 25 October 2010, 17:15:44

Had the same prob yesterday, got new sensor this afternoon so will get it fitted 2nite and see what happens.

Title: Re: Fault code 19
Post by: Welung666 on 25 October 2010, 17:19:49

Try starting the car before plugging in your Sealey, had the same troble sometime when I had one :y

Title: Re: Fault code 19
Post by: Cav9_4 on 27 October 2010, 13:48:39

Quote

Try starting the car before plugging in your Sealey, had the same troble sometime when I had one :y

Thanks Welung,tried that but still didn't work,paper clipped again and no codes!..Wayne

Title: Re: Fault code 19
Post by: pscocoa on 27 October 2010, 14:52:47

just noticed it is a 2.5 - readers don't work on them as withother models - there was a post on this last week by The Boy

Title: Re: Fault code 19
Post by: Diamond Black Geezer on 27 October 2010, 16:19:03

ah, that explains a lot!