Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: SP_3.2 on 28 October 2010, 12:52:05

Title: Best way clean nearside brake pipe
Post by: SP_3.2 on 28 October 2010, 12:52:05
Just have the car MOT ....it passed fine :) :) :).

Just had a advisory about the nearside front to back brake pipe being slightly corroded. Is this on the drivers side and also any best way to clean it up is it just wire brush job. Thanks

Steve. 
Title: Re: Best way clean nearside brake pipe
Post by: henryd on 28 October 2010, 12:58:35
just wire brush it off and either grease or waxoyl it to keep it from corroding :y
Title: Re: Best way clean nearside brake pipe
Post by: SP_3.2 on 28 October 2010, 13:01:00
Quote
just wire brush it off and either grease or waxoyl it to keep it from corroding :y

Great thanks.....Is the nearside on the drivers side :question
Title: Re: Best way clean nearside brake pipe
Post by: henryd on 28 October 2010, 13:04:11
Quote
Quote
just wire brush it off and either grease or waxoyl it to keep it from corroding :y

Great thanks.....Is the nearside on the drivers side :question
nearside is left hand side :y :y
Title: Re: Best way clean nearside brake pipe
Post by: SP_3.2 on 28 October 2010, 13:21:04
 :y :y Will get on the job later today. 
Title: Re: Best way clean nearside brake pipe
Post by: Agemo on 28 October 2010, 19:52:09
Another option is to replace with new copper pipe. OK you will need to bleed the brakes, but you would fit & forget.   ::)