Omega Owners Forum
		Omega Help Area => Omega General Help => Topic started by: chuftsmv6 on 05 November 2010, 19:46:09
		
			
			- 
				hi there i was wondering if anyone could help . i have a vibration coming from my clutch pedal when its fully out is this normal  :)i have a omega mini facelift mv6 3.0v6 1998 manual and i also have a juddering in first gear when i pull off i replaced the clutch  about a year ago and it started about 500 miles after i fitted the clutch  any info would be great thanks
			
- 
				oh oh!!! sounds like DMF but cold just be a recon clutch rather than a new one? vaux had a batch of bad ones around that juddered like billyo!! thought that had been sorted though
			
- 
				hi dont want to sound daft but what does dmf mean thanks ;D :)
			
- 
				do you mean dual mast flywheel im a bit slow at times haha ;D ;D :)
			
- 
				Yes, Dual Mass Flywheel :y
			
- 
				do you mean dual mast flywheel im a bit slow at times haha ;D ;D :) 
 nearly right!! ;D
 
- 
				thanks if it is the flywheel is therere any normal solid flywheels that will fit because i think the dmf is quite exspensive. thanks for the help ur a star  :) :) :y
			
- 
				thanks if it is the flywheel is therere any normal solid flywheels that will fit because i think the dmf is quite exspensive. thanks for the help you are a star  :) :) :y  
 Around £150 from buypartsby.com :y
 
 See the correction below  :-/
- 
				thats alot cheaper than m dealers i think they wanted 1000 for one i nearly past out when he said. thanks for the help.  ;D ;D :y :y
			
- 
				courtenay used to do a solid flywheel conversion? not sure if its still available but it was more expensive than a buypartsby dmf!!
			
- 
				il have to strip it down and have a good look then thanks again for the advice its helped alot  :y :y
			
- 
				Good job I checked as the price above is incorrect :( Sorry...
 
 From the buypartsby.com website...
 
 Part Number : 415003710
 Cost : £210.10 + vat
 
 Dual Mass Flywheel
 
 Model: Omega 3.0 V6
 Year range:  04/94-
 Location:
 Extra info:  Dual Mass Flywheel
 Plate Dia: (mm) X30XE
 
- 
				thats abit higher. at least its a lot lot lot  less than the m dealers thanks again  :y :y