Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: tony2 on 06 November 2010, 18:44:54

Title: fault code
Post by: tony2 on 06 November 2010, 18:44:54

hi everyone  help needed today i changed my cam cover gaskets on a 2.6  02 reg ,everything went fine untill i started car up,the problem is the spanner light stayed on and wont extinguish. when i got home i put my (cheap) code reader on and the folling came up code p1110 intermittent(4)intake manifold valve 1 open  wont reset what have i done :'(

Title: Re: fault code
Post by: feeutfo on 06 November 2010, 19:16:42

I believe that description means multi ram?

If so, 2 on the omega, one on the back pf the intakes behind radiator.

Tother, and more likely given the work done is the multi ram back of plenum pas side on a uk car. There pics on here somewhere. Probably left the plug off, easy done....?

Title: Re: fault code
Post by: feeutfo on 06 November 2010, 19:18:56

Quote

I believe that description means multi ram?

If so, 2 on the omega, one on the back pf the intakes behind radiator.

Tother, and more likely given the work done is the multi ram back of plenum pas side on a uk car. There pics on here somewhere. Probably left the plug off, easy done....?

Although I thought no.1 was the one on intake behind rad tbh.  :-/ black 3mill vac pipes running to them, very important on the omega.

Title: Re: fault code
Post by: tony2 on 07 November 2010, 11:12:59

morning everyone good news :D spanner light now off thanks to chrisgixer  i had left plug off at rear of plenum   went and checked this morning FEEL RIGHT IDOIT NOW :-/

Title: Re: fault code
Post by: Welung666 on 07 November 2010, 19:08:34

Quote

morning everyone good news :D spanner light now off thanks to chrisgixer  i had left plug off at rear of plenum   went and checked this morning FEEL RIGHT IDOIT NOW :-/

Don't worry, we've all done it ;) :y