Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Rainmaker on 27 November 2010, 01:49:20
-
As its am ill say morning all, now ive had the mv6 fettled and caressed n serviced shes all lovely but when popping the code reader on for a final check it came up with co241 and co244, no lights on the dash can anyone shed some light on these codes iirc correctly there to do with the tc/torque reducer i may be wrong though...
Rainy..
-
What engine?
If obd2 they relate to turbo charger afaict.
If not what does co relate to? What reader used?
-
Looking at the GM lists C0241 and C0244 are connected to the EBCM (electronic braking control module).
-
What engine?
If obd2 they relate to turbo charger afaict.
If not what does co relate to? What reader used?
i have the MV6 fella so the engine is the x30xe
code reader was a sealey one all codes were cleared after but i had nowt on the dash as a warning, engine has run fine since all seems ok...
was just stumped as to the codes as i never heard of them...
-
Looking at the GM lists C0241 and C0244 are connected to the EBCM (electronic braking control module).
ahh that may explain a bit i was and say was getting the tc light on at one point but it hasnt appeared since the service and the codes were cleared....